TDK InvenSense ICM-20602 Series

Main Title

ICM-20602 6-axis motion sensor

Mixed Media

The ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3x3x0.75mm (16-pin LGA) package.

High performance specs
- Gyroscope sensitivity error: ±1%
- Gyroscope noise: ±4mdps/√Hz
- Accelerometer noise: 100µg/√Hz
Includes 1K-byte FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode
EIS FSYNC support

ICM-20602 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V. Communication ports include I²C and high speed SPI at 10MHz.

The ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3x3x0.75mm (16-pin LGA) package.

Static HTML_2

Features/Applications

Table

Features		Applications
3-Axis Gyroscope with Programmable FSR of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps 3-Axis Accelerometer with Programmable FSR of ±2g, ±4g, ±8g, and ±16g User-programmable interrupts Wake-on-motion interrupt for low power operation of applications processor 1 KB FIFO buffer enables the applications processor to read the data in bursts	On-Chip 16-bit ADCs and Programmable Filters Host interface: 10 MHz SPI or 400 kHz Fast Mode I2C Digital-output temperature sensor VDD operating range of 1.71V to 3.45V MEMS structure hermetically sealed and bonded at wafer level RoHS and Green compliant	Smartphones and Tablets Wearable Sensors IoT Applications Motion-based game controllers 3D remote controls for Internet connected DTVs and set top boxes, 3D mice