New Product Introduction

NPI Body

onsemi 10BASE−T1S ethernet controller

NCN26010 - 10 Mb/s, single-pair, MAC + PHY, 802.3cg

The NCN26010 device is an IEEE 802.3cg compliant ethernet transceiver including a Media access controller (MAC), a PLCA Reconciliation Sublayer (RS) and a 10BASE−T1S PHY designed for industrial multi−drop Ethernet. It provides all physical layer functions needed to transmit and receive data over a single unshielded twisted pair. NCN26010 communicates to host MCUs via Open Alliance MACPHY SPI protocol.

Key features

IEEE 802.3cg 10Base-T1S compliant
Data rate of 10Mbit/s Half Duplex
Media independent interface (standard MII)
Physical layer collision avoidance (PLCA)

Additional features

Enhanced noise immunity
Replace various wired protocols: HART, FieldBus,
CAN, RS485, RS232, FlexRay, etc.
NCN26000: PHY Only with MII
NCN26010: MAC/PHY with SPI

Applications

Industrial automation
Home / Building control
Process and factory automation
Industrial wired connectivity
Sensor and control interfacing
Security and field instrumentation
Contactors/Overload protectors
Valves/Actuators

Download your Info Package now!

Available tools

Evaluation boards:

NCN26010BMNEVB
The NCN26010BMNEVB is a PCB designed to allow customers to connect to onsemi NCN26010XMNEVB 10BASE-T1S SPI enabled 10BASE-T1S MACPHY Evaluation board to Raspberry Pi single board computers (SBC).
Its main purpose is to act as a physical interface adapter, routing the PMOD connection of the NCN26010XMNEVB to the appropriate pins on the 40 pin Raspberry Pi SBC.
NCN26010XMNEVB
The NCN26010XMNEVB is a PCB designed to allow customers access to onsemi NCN26010 SPI enabled 10BASE-T1S MACPHY. Its main purpose is to demonstrate the MACPHYs basic functionality and doubles as a lab tool to allow customers to develop their own embedded software drivers for the NCN26010 device.
NCN26010XMNEVK
The NCN26010XMNEVK 10BASE-T1S MACPHY evaluation kit is a set of PCBs designed to allow customers access to onsemi NCN26010 SPI enabled 10BASE-T1S MACPHY. Its main purpose is to demonstrate the MACPHYs basic functionality and doubles as a lab tool to allow customers to develop their own embedded software drivers for the NCN26010 device.
The evaluation kit consists of the NCN26010BMNEVB bridge board and the NCN26010XMNEVB 10BASE-T1S evaluation board.