GreenPAK™ is a broad family of cost effective NVM programmable devices that enable innovators to integrate many system functions into a single custom circuit, and in the process minimize component count, board space, and power consumption. Using GreenPAK Designer Software and GreenPAK Development Kit, designers can create and program your perfect custom circuit in minutes.
Product Highlights: GreenPAK™ with In-System Programmability
SLG46824
17-GPIO, 2 ACMPs, I2C, 19 LUTs (max.), 8 CNT/DLY (max.), 17 DFF/LATCH (max.) and other Macrocells
The SLG46824 provides a small, low power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple time Non-Volatile Memory (NVM) to configure the interconnect logic, the IOs and the macrocells of the SLG46824. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
BUY NOW
SLG46826
17-GPIO, 4 ACMPs, I2C, 19 LUTs (max.), 8 CNT/DLY (max.), 17 DFF/LATCH (max.) and other Macrocells
The SLG46826 provides a small, low power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple time Non-Volatile Memory (NVM) to configure the interconnect logic, the IOs and the macrocells of the SLG46826. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
BUY NOW
SLG47004
Various Operational Amplifiers, Digital Rheostats, EEPROM and a Wide Set of Analog and Digital Macrocells
The SLG47004 builds a mixed-signal solution by integrating a mix of advanced analog features including Op Amps with programmable bandwidth, 10-bit digital rheostats, analog switches, and a chopper analog comparator. The unique Auto-Trim feature highlights the ability of this GreenPAK device to periodically tune its rheostat value to either compensate for system error sources or reconfigure circuit parameters. The SLG47004 provides dynamic power down control for all analog and digital blocks to optimize power consumption performance. Common applications include sensor interfaces, ADC analog front-ends, configurable amplifiers, tunable filters, and a variety of other analog circuits. This multi-time programmable solution is built into a tiny 3 mm x 3 mm package.
GreenFET load switch products
GreenFET high-performance load switches are designed and optimized for high-side power rail control applications from 0.25 V to 25.2 V where the load currents range from 1 A to 9 A.
GreenFET load switches:
- Single-channel nFET & pFET Load Switches in ST[D/Q]FNs: 1 mm2 to 4 mm2
- Single-channel Load Switches in WLCSP: 1 A to 4 A, 0.56 mm2 to 1.5 mm2
- Dual-channel nFET and pFET Load Switches in STDFNs: 3 mm2
- Maximum VDD Voltage Ranges: 2 V, 3.6 V & 5 V
- FET VIN Range: 0.25 V to VDD
- RDSON Range: 4 mΩ to 45 mΩ
- ST[D/Q]FN IDS Current Range: 1 A to 9 A
- UL2367 Current-limiter Certified (selected part numbers)
High voltage GreenFET load switches:
- Single-channel Load Switches: 2.3 mm2 to 5 mm2
- Power-supply/FET Input Voltage Ranges: 4.5 V to 25.2 V
- RDSON Range: 13.3 mΩ to 50 mΩ
- IDS Current Range: 3 A to 6 A
- Application-specific WLCSPs for Smartphones
- UL2367 Current-limiter Certified (selected part numbers)
GreenFET load switch value proposition
High-performance proprietary FET design and advanced assembly techniques
Ultra-low, RDSON FET structures:
- nFETs: Single-channel load switches as low as 4 mΩ
- Back-to-back, Reverse-current blocking FETs as low as 15 mΩ
- pFets: Single-/dual-channel load switches as low as 17 mΩ
Ultra-small package sizes
- GreenFETs
- ST[D/Q]FNs from 1 mm2 to 4mm2, 0.4 mm pitch
- WLCSPs from 0.56 mm2 to 1.5 mm2, 0.35 mm or 0.4 mm pitch
- High voltage GreenFETs
- 4.8 mm2 STQFNs with 0.4 mm pitch
- WLCSPs from 5 mm2
High operating IDSs from 1 A to 9 A
- GreenFET and high voltage GreenFET load switches generate very low thermal gradients across PCBs
- Use the GreenFET and high voltage GreenFET load switches increase circuit packing density
Standard compliance
- UL Certification (selected HFET1 part number)
Dialog’s GreenFET3 and HFET1 load switch features
Scalable and flexible power management solutions.
* Not all features are shown and not all are available on all part numbers
Tools, reference material, support
Technology leadership and support
Comprehensive selection guide available online: Dialog load switch product selector
Support Tools are available Here
- Layout guidelines
- PCB libraries
- LTSPICE and PSPICE models
- Application Notes
Non-isolated AC/DC buck converters
The Non-Isolated AC/DC Buck Converter family from Renesas is a series of universal input AC/DC switching buck regulators that feature a 700V integrated MOSFET capable of delivering up to 8W output power, with the output voltage as low as 3.3V, with variable package options. It features unique constant-off-time control method that helps to achieve ultra-low standby power, negligible EMI, and no audible noise. This product family also supports secondary-side-feedback isolated flyback topology.
700V AC-DC buck regulator value proposition
- Very low standby power for IoT applications
- Targeting zero standby power (<5mW)
- Resolves known issues in competitors’ products
- Improved EMI via clock dithering and controlled gate drive
- Audible-noise-free operation
- Flexible platform
- Base RAA223011 supports three power levels of 1W, 2W and 4W
- RAA223012 supports 8W
- Ability to integrate LDO and add “high-voltage standby” feature
Product highlights
| Part No. |
VIN Range (V) |
VOUT Range (V) |
Package |
Technical Highlights |
| RAA223011 |
20 to 305 |
3.3 to 54 |
SOICN, TSOT |
700 AC/DC regulator with ultra-low standby power and up to 4W output power |
| RAA223012 |
20 to 305 |
3.3 to 54 |
SOICN, TSOT |
700 AC/DC regulator with ultra-low standby power and up to 2.5W output power |
| RAA223021 |
20 to 305 |
3.3 to 54 |
SOICN |
700 AC/DC regulator with ultra-low standby power and up to 8W output power |
DC/DC converters
Renesas portfolio of DC/DC converters include linear regulators, switching regulators, controllers, PMICs, and power modules. These product families cover a wide range of topologies including buck, boost and buck/boost.
Buck Regulators (Integrated FETs)
Renesas offers a wide portfolio of high-performance buck regulators with integrated FETs. A buck converter, also known as a step-down converter, is a DC/DC power converter that provides voltage step down and current step up. The converter reduces the voltage when the power source has a higher voltage than Vin. A buck converter generally provides the most efficient solution with the smallest external components.
Unsure if a low powered linear regulator or highly efficient switching regulator is a better option for your design?
Learn more about Linear vs. Switching Regulators.
Benefits and key features
Robust & reliable performance
- PGOOD, enable adjustable soft-start
- Extensive protection (OCP, OVP, OTP, SCP)
- External frequency synchronization
High integration
- Integrated HS/LS FETs
- Internal compensation
Target applications
- Servers and infrastructure POLs
- Industrial PCs, factory automation, PLCs
- General purpose POLs
- Telecom and networking systems
Product highlights
New 24V to 72V synchronous buck regulator family.
New Series of DC/DC regulators supports most industrial supply rails with one pinout!
Common features:
- Integrated high-performance MOSFETs
- Programmable, fixed switching frequency up to 800kHz
- High efficiency light-load operation
- IC can be biased from its own output to improve efficiency
- Power Good, Soft Start, and Enable functions
| Operating Voltage Range |
Absolute Max Supply Voltage |
Max Continuous Load Current |
Part Number |
| 4.5 ~ 24V |
30V |
5A |
RAA211250 |
| 4.5 ~ 42V |
45V |
5A |
RAA211450 |
| 4.5 ~ 60V |
65V |
3A |
RAA211630 |
| 4.5 ~ 72V |
80V |
2A |
RAA211820 |
Download a complete overview from HERE
Renesas is a leading low-dropout regulator (LDO) supplier in low power handheld applications with world-class differentiated single and dual LDOs which have ultra-high PSRR up to 3MHz, low input voltage range, tiny packages, and ultra-low noise and quiescent current. Renesas' high current LDOs support up to 3A and have industry-leading fast load transient response, tightest voltage output accuracy at full load and over the full junction temperature, and lowest dropout voltage in their class.
Additionally, Renesas low cost linear regulators generate a low voltage bias supply from intermediate distributed voltages commonly used in telecom and datacom applications. These devices may be used as start-up or as continuous low power regulators.
High-Performance LDOs
