The Infineon XENSIV™ TLI493D family offers ultra-compact, low-power 3D magnetic sensors ideal for industrial and consumer applications. With a tiny WLB-5 package (1.13mm x 0.93mm x 0.59mm) and 7 nA power-down current, it enables efficient performance, replacing traditional resistor-based or optical solutions in space-constrained designs.

Key features:

• 3D (X, Y, Z) magnetic flux density sensing of ±160 mT
• Programmable flux resolution down to typ. 65 µT
• Extremely small form factor: typ. 1.13 mm * 0.93 mm * 0.59 mm
• X-Y angular measurement mode
• Power down mode with 7 nA (typ.) power consumption
• 12-bit data resolution for each measurement direction plus 10-bit temperature sensor
• Variable update frequencies and power modes (configurable during operation)
• Temperature range Tj = -40°C…125°C, supply voltage range = 2.8 V…3.5 V
• Triggering by external microcontroller possible via I2 C protocol
• Interrupt signal to indicate a valid measurement to the microcontroller

Learn more   | Download Data Sheet   

The NAC1080 is a NFC actuation controller with integrated H-bridge and energy harvesting modules, enabling cost-effective development of passive smart actuators like passive locks.

Key features:

• NFC interface compliant to ISO 14443 type A Arm® 32bit Cortex®-M0 microcontroller core
• Dual-operation mode: passive- or battery-mode
• Memory:
  • 16kB ROM as bootloader
  • 16kB RAM
  • 60kB NVM
• Digital I/O: SPI, UART
• Integrated H-bridge supports up to 250mA load current
• Available in DSO-16 package

Learn more   | Download Data Sheet   

The PSoC™ 6 family is built on an ultra-low-power architecture, and the MCUs feature low-power design techniques that are ideal for battery powered applications. The dual-core Arm® Cortex®-M4 and Cortex-M0+ architecture lets designers optimize for power and performance simultaneously.

Key features:

Learn more   | Download Data Sheet