Design HB2 America

Reference Design Details

Design Hub

Search Reference Designs
SubNav - Design Hub
Script Application

3 kW Power Supply Unit for Server and Data Center Applications based on Infineon Solutions

The PSU comprises a front-end AC-DC bridgeless totem pole converter followed by a back-end DC-DC isolated half-bridge LLC converter. The front-end totem pole converter provides power factor correction (PFC) and total harmonic?distortion?(THD). The LLC converter provides safety isolation and a tightly regulated output voltage. The measured peak efficiency of the complete PSU at 230 VAC is 97.5 percent, not including the internal fan, and 97.4 percent, including the internal fan. The overall outer dimensions of the PSU are 73.5 mm x 520 mm x 40 mm, which yields a power density in the range of 32 W/cubic inch (1.95 W/cubic cm).
CATEGORY
Data center,Power & charging
REFERENCE DESIGN
×
Share Reference Design

Design Shared Successfully!


Would you like this design to be modifiable in the future?



PARTS IN DESIGN / BOM
MFGR PART# BLK NM
×
Modify Design

We will notify the design team. Visit the "My Designs" tab for updates when the design is available to modify. Thank you.

av-dh-disclaimer-america

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY.  SEE LEGAL NOTICES | AVNET FOR ADDITIONAL INFORMATION.

3 kW Power Supply Unit for Server and Data Center Applications based on Infineon Solutions
 
RELATED DESIGNS
null
AMD Versal AI Core VC1902 Space Grade based on Renesas Solution
The ISLVERSALDEMO2Z evaluation board provides the power management for the AMD Xilinx Space Grade Versal ACAP AI Core VC1902 using Renesas' Radiation Hardened Power Management devices
View Design
null
DH_AMER_106098
This Renesas design outputs AC through an inverter circuit and charges the battery in normal operation. Then in case of a power outage, it uses the battery to make the AC power through the inverter.
View Design
null
DH_AMER_106391
This Renesas solution shows a complete high-end (400V/2kW) synchronous motor, powered from single phase or 3-phase mains power, with power factor correction (PFC).
View Design
null
AMD Kintex UltraScale Space Grade Power Tree based on Renesas Solution
The XQRKU060 requires a complex power solution with multiple low voltage supply rails with higher operating currents and needs to meet power sequencing requirements.
View Design
null
AMD Space Grade Versal ACAP AI Edge VC2302 based on Renesas Solution
The ISLVERSALDEMO3Z demonstration board provides power management for the AMD Space Grade Versal ACAP AI Edge VC2302 using Renesas' Radiation Tolerant Power Management devices.
View Design
Reference Design Block Diagram of E-Bike System Solution based on Renesas Solution
E-Bike System Solution based on Renesas Solution
This design uses a combination of advanced MCU, power and BMS devices to provide a complete solution for any kind of e-bike.
View Design
null
DC EV Charger for Flexible and Reliable Power based on onsemi Solution
This is a common two-level EV charging circuit, consisting of a three-phase half-bridge stage and the second DAB (Dual Active Bridge) stage.
View Design
null
AC-Coupled Energy Storage System based on onsemi Solution
An AC-coupled solar energy storage system stores energy in an AC form. It uses an inverter, providing flexibility and reliability.
View Design
null
DC Energy Storage (Efficiency Optimized) based on onsemi Solution
An AC-coupled solar energy storage system, which uses an inverter, providing flexibility and reliability.
View Design
null
DC Fast Charger based on Omron solution
This reference design offers a comprehensive solution for developing high-power EV charging stations. It provides a blueprint for engineers to design efficient of 200kW of charging power.
View Design
Reference Design Block Diagram of AMD Zynq US+ Cost Optimized Power Tree based on AnDapt Solution
AMD Zynq US+ Cost Optimized Power Tree based on AnDapt Solution
The ARD_ZUM_A1 is a scalable power supply designed to provide power to Xilinx Zynq UltraScale+ Cost Optimized power FPGA devices.
View Design
Reference Design Block Diagram of AMD Versal Prime VM1802 Power Tree Use Case 4 plus System Voltages based on Infineon Solution
AMD Versal Prime VM1802 Power Tree Use Case 4 plus System Voltages based on Infineon Solution
Design for powering AMD Versal Prime VM1802 based on Infineon Power Solution (Use Case 4) including the System Voltages. Features IRPS5401 PMIC.
View Design
3 kW Power Supply Unit for Server and Data Center Applications based on Infineon Solutions
 
RELATED ARTICLES
How 48V systems are supporting fully electric vehicles
By Philip Ling   -   July 22, 2024
The automotive supply chain for 48V subsystems has seen increased demand from mild hybrids. With the same solutions now going into plug-in hybrid and full battery electric vehicles, 48V is an active market segment.
Read More
Optimized power switching revs up for next-generation automotive applications
By Philip Ling   -   July 22, 2024
The move to zonal architectures is redefining the power distribution architecture. Automotive OEMs developing advanced features require optimized and intelligent power switches.
Read More
Understanding trade-offs for DC-DC converters in EV charging
By Avnet Staff   -   June 24, 2024
Within EV fast charging technologies, focus is on the crucial role of DC-DC converters in enabling efficient energy transfer. The design will be influenced by the primary commercial objective.
Read More
Designing Vienna Rectifiers for EV Chargers
By Avnet Staff   -   June 24, 2024
As the EV charging infrastructure grows, EVSE providers need to offer a choice. Cost, efficiency and reliability are trade-offs that begin at the component level and move quickly to the converter topology.
Read More
Passive components in EV chargers should be selected carefully
By Neil Willard   -   January 15, 2024
Demand for EV fast charging stations means passive components that can tolerate the high power/high energy environment are also drawing attention. Components such as DC link capacitors and magnetics need to be carefully selected for the application.
Read More
Explore the challenges and opportunities of bi-directional charging and EVs
By Miguel Tapia   -   December 7, 2023
In bi-directional charging, energy can flow into an EV battery, be extracted from it and routed back to the grid. With the momentum of climate protection, it’s poised to become a common feature in EVs.
Read More
Integrating EV charging with Matter and the smart home
By Harvey Wilson   -   October 5, 2023
With electric vehicles (EVs) becoming more common comes increased focus on how we charge them. How can we integrate the EV charger with other smart home systems, and what opportunities could this create?
Read More
How V2G benefits drivers and electricity suppliers
By Harvey Wilson   -   October 5, 2023
Vehicle-to-grid (V2G) enables EVs to send power from their batteries back to the main electricity grid. This will be hugely helpful in dealing with the inconsistency of renewables. However, it brings with it new technical and commercial challenges.
Read More
The future of EV charging: revolutionary developments are closer than you think
By Harvey Wilson   -   October 4, 2023
Electric vehicles (EVs) are big business. You only need to look at Tesla’s share price to see just how big. Imagine how much more valuable the market would be if EVs could charge in a few seconds, not minutes or hours.
Read More
What’s going on inside an energy harvesting PMIC?
September 25, 2023
Power management ICs, or PMICs, are useful in most applications. A single PMIC can control multiple power rails and manage the way they come online at power-up. This can protect sensitive devices.
Read More
When GaN is too fast for your application, consider SiC instead
By Avnet Staff   -   April 24, 2023
The best power converters are not always the ones that switch the fastest. Gallium Nitride (GaN) switches faster than other power transistors, but sometimes it is too fast. Silicon Carbide (SiC) MOSFETs may sometimes be a better option.
Read More
Combining GaN and SiC for cost-effective power conversion
By Avnet Staff   -   April 20, 2023
The public image of silicon carbide (SiC) and gallium nitride (GaN) is as wonder materials. We know they are displacing older silicon technology, boosting the efficiency of power conversion stages. However, neither is a universal solution.
Read More
3 kW Power Supply Unit for Server and Data Center Applications based on Infineon Solutions