Smart NFC Access Control System based on Renesas Solution
This access control system is used to provide authenticated access and store user information through an NFC card, camera, or manually entering user information. Capacitive buttons ensure that no mechanical key failure is encountered over a long period of usage. Haptics are provided for active response to the user on touch. A proximity sensor is provided for auto wake-up functionality. The option of porting either a Linux or Android operating system gives the user flexibility in terms of UI experiences.
CATEGORY
Connectivity & communications; Security
REFERENCE DESIGN
PARTS IN DESIGN / BOM
| MFGR | PART# | BLK NM |
|---|---|---|
| Renesas Electronics | R7F102GBC3CFP#BA0 | Microprocessor |
| Renesas Electronics | ISL29501IRZ-T7 | ToF Sensor |
| Renesas Electronics | RYZ024A000FZ00#HD0 | Cellular Module |
| Renesas Electronics | R9A07G044L23GBG#AC0 | Microprocessor |
| Renesas Electronics | AT25QL128A-UUE-T | Flash Memory |
| Renesas Electronics | PTX105RDQ56D13 | NFC Module |
| Renesas Electronics | DA7211-01UA6 | Codec |
| Renesas Electronics | DA7280-00V42 | Motor Driver |
| Renesas Electronics | 5P35023B-000NLGI | Clock Generator |
IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY. SEE LEGAL NOTICES | AVNET FOR ADDITIONAL INFORMATION.
RELATED DESIGNS
