MiniZed

MiniZed™ is a single-core Zynq 7Z007S development board. This board targets entry-level Zynq developers with a low-cost prototyping platform.
On-board connectivity through the Murata "Type 1DX" wireless module that provides
- Wi-Fi 802.11b/g/n
- Bluetooth 4.1 plus EDR and BLE (Bluetooth Low Energy)
On-board memory from Micron
- 512 MB DDR3L
- 128 Mb QSPI flash
- 8 GB eMMC
Peripherals can be plugged into
- Dual Pmod-compatible connectors (16 GPIO)
- Arduino-compatible shield interface (22 GPIO)
- USB 2.0 host interface
Physical interface
- Two bi-element user LED’s
- User pushbutton
- Reset pushbutton
- User switch
The integrated power supply from Dialog generates all on-board voltages. An auxiliary microUSB supply input can be used to power designs that require additional current.
On-board MEMS sensors from ST Micro
- LIS2DS12 Motion and temperature sensor
- MP34DT05 Digital Microphone
JTAG circuitry is incorporated onto the MiniZed base board. Only a single microUSB cable is required for power, programming, JTAG emulation and serial terminal debug output.
Forum Support on element14 Projects on hackster.io
MiniZed is discontinued, documentation is provided for support.
- Technical Documents
- Reference Designs
- Technical Specifications
- Community Posts
- FAQS
Avnet MiniZed Linux with Simulink Support 2017.2
MiniZed PDM Microphone Reference Design and Tutorial 2017.1
MiniZed SDSoC Platform for v2017.4 (baremetal with Xilinx Matrix Multiple Example)
MiniZed SDSoC Platform for v2017.1 (baremetal with Xilinx Matrix Multiple Example)
PetaLinux 2020+ BSP (Sharepoint site)
MiniZed_QSPI.bsp 2019.2 (BSP for booting fully from QSPI)
MiniZed_QSPI.bsp 2019.2 (BSP for booting indirectly from eMMC)
PetaLinux 2019.1 Compressed BSP
PetaLinux 2016.4 Compressed BSP
MiniZed.bsp 2017.4 (BSP for booting from QSPI flash to eMMC)
MiniZed.bsp 2017.2 (BSP for booting from QSPI flash to eMMC)
MiniZed_QSPI.bsp 2017.1 (BSP for booting from QSPI flash only)
Minized_QSPI.bsp 2017.4 (QSPI flash fallback for booting from flash to eMMC)
Minized_QSPI.bsp 2017.2 (QSPI flash fallback for booting from flash to eMMC)
Creating a PetaLinux 2017.2 (BSP used for Booting from QSPI and eMMC)
VirtualBox and Linux VM Installation Guide v2020+ (Sharepoint site)
VirtualBox and Linux VM Installation Guide v2019.2
VirtualBox and Linux VM Installation Guide v2019.1
VirtualBox and Linux VM Installation Guide v2018.3
VirtualBox and Linux VM Installation Guide v2018.2
VirtualBox and Linux VM Installation Guide v2017.2
Specification | Description |
---|---|
MEMORY |
|
CONNECTIVITY |
|
EXPANSION |
|
USER INPUTS |
|
AUDIO |
|
|
|
POWER |
|
CERTIFICATION |
|
DIMENSIONS |
|
CONFIGURATION MEMORY |
|
GPIO |
|
USB |
|
COMMUNICATIONS |
|
USER I/O |
|
SOFTWARE |
|
OTHER |
|

Do Avnet's products come with a warranty? ... more
I have the 2017.2 Vivado project from github, I have built this and generated a petalinux builds which boots on the minized. My next task was to add some IP, as an initial simple test I have just changed the axi_gpio_1 to dual mode and added an outp ... more
- MiniZed development board
- Voucher for SDSoC license from AMD Xilinx
- Micro USB cable