Design HB2 EBV

Reference Design Details

Design Hub

Search Reference Designs
Sub Navigation
Web Content Viewer

1ED3491MU12M Gate Driver Evaluation Board based on Infineon Solution

The EVAL-1ED3491MX12M is in half-bridge configuration with two gate driver ICs (1ED3491MU12M) to drive power switches such as?IGBTs?and?SiC MOSFETs. The switch type can be freely chosen. The board has a size of 85 x 55 x 15 mm without any power switch assembled.
CATEGORY
Analog
REFERENCE DESIGN
×
Share Reference Design

Design Shared Successfully!


Would you like this design to be modifiable in the future?



PARTS IN DESIGN / BOM BY STORE

The displayed part lists is a small subset of the complete BOM.


MFGR PART# BLK NM
Avnet Abacus logo
If you are not a customer of Avnet , please Register Here for Design Hub to interact with the AVAIL design tool and view BOM lists.

×
Modify Design

We will notify the design team. Visit the "My Designs" tab for updates when the design is available to modify. Thank you.

av-dh-disclaimer-ebv

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY.  SEE LEGAL NOTICES | AVNET EMEA FOR ADDITIONAL INFORMATION.

DH Related Designs Menu
 
RELATED DESIGNS
Reference Design Block Diagram of CY3689 EZ-USB FX2LP Discovery Kit based on Infineon Solution
CY3689 EZ-USB FX2LP Discovery Kit based on Infineon Solution
EZ-USB(TM) FX2LP and EZ-USB(TM) FX2G2 are the industry as de facto USB peripheral controllers, adding USB connectivity of up to 480 Mbps to any system.
View Design
Reference Design Block Diagram of 1ED3491MU12M Gate Driver Evaluation Board based on Infineon Solution
1ED3491MU12M Gate Driver Evaluation Board based on Infineon Solution
Evaluation board for 1ED3491Mx12M - 2300 V, 9 A, single-channel flexible isolated gate driver with active Miller clamp, adjustable DESAT and Soft-off.
View Design
Reference Design Block Diagram of AMD Zynq 7000 Power Tree based on onsemi Solution
AMD Zynq 7000 Power Tree based on onsemi Solution
The AMD Zynq 7000 Power Tree is a power management solution that provides the necessary power rails to the FPGA using onsemi's key power devices.
View Design
Reference Design Block Diagram of AMD Versal Prime VM1802 Power Tree Use Case 4 plus System Voltages based on Infineon Solution
AMD Versal Prime VM1802 Power Tree Use Case 4 plus System Voltages based on Infineon Solution
Design for powering AMD Versal Prime VM1802 based on Infineon Power Solution (Use Case 4) including the System Voltages. Features IRPS5401 PMIC.
View Design
Reference Design Block Diagram of AMD Versal Prime VC1802 Power Tree Use Case 4 plus System Voltages based on Infineon Solution
AMD Versal Prime VC1802 Power Tree Use Case 4 plus System Voltages based on Infineon Solution
Power solution to support Versal Prime VC1802 Use case 4 based on Infineon Power Solution using two Power Units IRPS5401.
View Design
Reference Design Block Diagram of Inrush Current Limiter for Active AC-DC Bridge Rectifier based on STMicroelectronics Solution
Inrush Current Limiter for Active AC-DC Bridge Rectifier based on STMicroelectronics Solution
The STEVAL-SCR002V1 introduces a simple and innovative AC-DC front-end circuit that allows the designer to perform an inrush current limitation in any converter with input rectifier bridge...
View Design
null
AMD Virtex UltraScale+ Power Tree based on onsemi Solution
The AMD Virtex UltraScale+ power solution is a general-purpose power tree for the Virtex UltraScale+ series of FPGAs using onsemi's key power devices.
View Design
Reference Design Block Diagram of Smart Battery Management for Mobile Robotics based on NXP
Smart Battery Management for Mobile Robotics based on NXP
Reference design of the NXPs RDDRONE-BMS772 is a standalone BMS reference design suitable for mobile robotics such as drones and rovers, supporting 3 to 6 cell batteries
View Design
Reference Design Block Diagram of NAFExx388-EVB 8 Channels Universal Input AFE Evaluation Board based on NXP
NAFExx388-EVB 8 Channels Universal Input AFE Evaluation Board based on NXP
Reference Design of NXPs NAFExx388-EVB designed for the testing the NAFExx388, which is a highly configurable, industrial-grade multichannel analog input analog front-end (AFE).
View Design
Reference Design Block Diagram of AMD Virtex UltraScale (VU065-VU200) Power Tree based on onsemi Solution
AMD Virtex UltraScale (VU065-VU200) Power Tree based on onsemi Solution
The AMD Virtex UltraScale (VU065-VU200) power solution is a general-purpose power tree for the Virtex UltraScale+ series of FPGAs using onsemi's key power devices.
View Design
Reference Design Block Diagram of AMD Kintex UltraScale (KU035-KU075) Power Tree based on onsemi Solution
AMD Kintex UltraScale (KU035-KU075) Power Tree based on onsemi Solution
The AMD Kintex UltraScale (KU035/KU076) Power Tree is a power management solution for the Kintex UltraScale FPGAs using onsemi's key power devices.
View Design
Reference Design Block Diagram of AMD Artix UltraScale+ (AU20P-AU25P) Power Tree based on onsemi Solution
AMD Artix UltraScale+ (AU20P-AU25P) Power Tree based on onsemi Solution
The AMD Artix UltraScale+ (AU20P/AU25P) Power Tree is a power management solution for the Artix UltraScale+ FPGA Family using onsemi's key power devices.
View Design
DH Related Articles Menu
 
RELATED ARTICLES
Powering building alarm systems and driving LEDs
By Bernard Vincens   -   October 3, 2022
This article investigates the technical considerations for powering building alarm control systems, sensors, and indicator panels, emphasising power conversion efficiency and achieving a low power consumption profile.
Read More
An engineers' guide to watchdog supervisors and wired communication interfaces in building control HMIs
By Bernard Vincens   -   September 14, 2022
This article investigates some of the causes of unpredictable system behaviour and highlights components that can prevent it from happening.
Read More
Investigating the technical considerations for analog components used in motion control drives
By Milan Ivkovic   -   May 19, 2022
This article explores the importance of the motor drive power supply, current sensing of the drive circuits, and using ultrasound for condition-based monitoring.
Read More
Choosing analog sensor and power management parts for factory automation smart sensor nodes
By Milan Ivkovic   -   May 4, 2022
Read about fundamental technical considerations when selecting analog sensor and power management components used for factory automation applications.
Read More
Achieving precision analog to digital conversion in test and measurement applications
By Milan Ivkovic   -   April 8, 2022
Instrumentation systems take the raw sensor data, amplify it, condition the signals to remove unwanted artefacts, and then analog to digital converters process the data ready for digital control systems.
Read More
Analog and power management considerations for low power asset tracker design
By Milan Ivkovic   -   April 8, 2022
Compact, robust, battery-powered wireless asset trackers are regularly attached to shipping containers and pallets to keep customers and suppliers informed of delivery progress.
Read More
Is best in class the only consideration for your analog design?
December 10, 2019
It’s easy to seek out the absolute top of the line when it comes to a design. Whatever the “best” part is, is probably what’s going to be the most compelling for your design, right?
Read More
Designing Reliable Analog Circuits in a Less-Than-Reliable World
December 10, 2019
Analog touches everything. If not for the multitude of analog and mixed-signal components that vendors have developed in the past decades, the digital “revolution” that has made so many industry sectors leap forward would not be possible.
Read More
6 Unique Op Amp Circuits
December 10, 2019
Read More
Connectivity Among Major Analog Design Considerations in Health Wearables
December 10, 2019
Development of very low powered analog body sensors, digital microcontrollers, and innovative power and battery management circuits are driving the growth of wearable healthcare products.
Read More
Redefining nanopower for the Internet of Things
December 10, 2019
Internet of Things trends today revolve around shiny objects—whether they be artificial intelligence or blockchain—but what if one of the most revolutionary parts of the IoT is something designers consider every day in devices?
Read More
1ED3491MU12M Gate Driver Evaluation Board based on Infineon Solution
 
RELATED EVENTS
EBV Power Fair 2022


Date: April 20, 2022
Location: Online, On Demand