Design HB2 America

Reference Design Details

Design Hub

Search Reference Designs
SubNav - Design Hub
Script Application

USB PD 240W Battery Management and Charger System based on Renesas Solution

This design is a USB-PD Battery Management & charger system capable of delivering 240W of charge for up to a 10-cell battery pack. The USB PD controller handles communication with an AC/DC smart source for more current and/or higher voltages over the USB cable. The 60V buck-boost controller is used to support constant current charging. The regulation current and voltage are controlled by a pulse width modulation (PWM) output from the USB. The RAA489220 is a 10-cell Battery Front-End (BFE) controller used for monitoring system health and system status.
CATEGORY
Energy,Hardware,Embedded,Power & charging

Would you like this design to be modifiable in the future?



PARTS IN DESIGN / BOM
MFGR PART# BLK NM
×
Modify Design

We will notify the design team. Visit the "My Designs" tab for updates when the design is available to modify. Thank you.

av-dh-disclaimer-america

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY.  SEE LEGAL NOTICES | AVNET FOR ADDITIONAL INFORMATION.

USB PD 240W Battery Management and Charger System based on Renesas Solution
 
USB PD 240W Battery Management and Charger System based on Renesas Solution
 
USB PD 240W Battery Management and Charger System based on Renesas Solution